Відео

You will have to enter the settings, and then network configuration. Please read the manual, the process is explained there. But turn the internal hotspot off only after you configured an external router, and after you made sure it is working as it should.

I am glad it helped..

I still have Facebook because of some groups I follow or manage. Otherwise I don't think I would ;) I am not very familiar to Github. It looks quite complicated, or I am too stupid, one of the two.. 😀🤪

By the way, if you don't have Facebook how did you find this video? I am asking because I normally only publish them on the Facebook groups I follow.

@@pilot140467 By googling, i wanted to make myself a switcher and I found that of Armando Colangelo iLooPino 2.0 and on youtube, I found your channel.

A Facebook group. Please search for a group called "iLoopino Guitar Effects Switcher" The whole project is being posted and discussed there.

Probably.. 😀 The main problem is the Digital Potentiometers being in stock again. I had the exact amount for this project.

It works quite well 😀

It is a library that does that. It is called WiFimanager.

Turn the internal hotspot off, but only after you have the external router working. What audio is stopping playing? The audio from the player, or all audio? What do you have connected to the USB ports? A pendrive?

@@pilot140467 yea I changed the IP address on the router & mixer so it's not the same & turned off hotspot & wifi just using the router connection is working but today I was getting signal to the mixer but nothing was coming out the speakers 🙈

@@DjPositiveP You didn't answer my question about which audio is not playing. USB stick? All audio? I also understand that you are able to control the mixer, so the wifi connection is working?

@@pilot140467 yea all audio cut off.. yea I used the hard wire from the mixer LAN Port to the router and connected wirelessly to the router

@@DjPositiveP all audio cutting off but the mixer can still be controlled is not good and makes me believe that it has nothing to do with the router. Do you have anything plugged on the USB ports?

Hi, Well, It am not an expert, I have followed some tutorials, asked some questions, successfully did it for myself and did the video so what I have learnt could also help others. But my guess is that in case the Router has trouble assigning an IP to the device, it will always connect if this device already has an IP assigned.

I am not sure I understand what you mean. And the video is about the Ui12 and Ui16. I have no idea how the Ui24 is configured. I don't have one, and I have never worked with one. Sorry about that. :(

The expression "The Router goes South" means that the Router got broken, failed, stopped working for some reason. Changing the Router's IP to the mixer's default IP is what the video is all about. Did you understand the opposite? :o 1) No, you misunderstood it obviously. If the router is configured to the Mixer's default IP Range (10.10.2.x), then if the router stops working you just need to reset the mixer's network to default to re-enable the internal hotspot. As the router already used the mixer's default IP range, you can even just use the same browser window that is already open on your Tablet, PC, Phone, etc... Please refer to the Ui mixer manual to learn how to reset the Network to default. 2) Did you watch the video? )I suggest you watch it again :) That is exactly what the video tries to explain. I know I am not very good making videos and expressing myself. Perhaps that is the problem :( 3) Well, you could use the router's default IP Range, but you would still have to reset the mixer's network to enable the internal hotspot. That would delete the router IP from the Mixer settings and would replace them with the mixer's default. That means you would have to configure the browser to the default Ui IP address instead of the default router IP address you were using before. If this happens in a live show, it is already bad enough to have to reboot the mixer, never mind having to also restart the browser with a new IP address that you might not even remember at the moment. Every second counts. If you were already using the Mixer's default IP Range on the router, and it failed, you don't need to remember anything else, except how to reset the Mixer's network, and in theory you should be up and running in just a couple of minutes. I hope I managed to answer your questions..

@@pilot140467 yes now I understand where you would use the units internal wifi hotspot if the external router goes down and therefore all the devices would remain with their same Fixed IP

@@thefishnmusician9667 Yeah, this could be a real advantage if we use several devices. But let's hope that our Routers never "Go South" 😃🤣🤣

@@pilot140467 Just on all that: can we build in redundancy, on the basis that the main connection to the router/UI is via an ipad, say, by hardwiring the laptop with a cat5 cable to another LAN port on the router...? Does that give us a direct connection to the UI, should something happen to the wireless connection of the ipad....

@@stuartdocherty8409 you can connect a Laptop to the router via network cable. Just give a static IP to the laptop in the same range as the router's IP. For example, imagine that the router's IP address is 10.10.2.100, then you configure the IP range the router can assign to other devices from say 10.10.2.11 to 10.10.2.99 The other IP addresses from 10.10.2.1 to 10.10.2.10 will be reserved for devices with static IP as they are out of the range the router will assign automatically to other devices. So, your mixer will have a static IP of 10.10.2.1. Now create a network connection on your Laptop, and assign a static IP of for example 10.10.2.2 Now the Laptop should be able to communicate with the mixer without any conflicts with other devices connected wirelessly with the router.

I am glad it helped. Nice that you have fixed it. Well done.

Yup. :) It is a DIY project, and you can also build it. Not my project though, I just helped the developer with testing it. There is a new one now supporting a couple Frsky proticols. I don't have the link at the moment but I can post it later if you want.

Hi, check the switch. perhaps it got broken. be careful not to reverse the battery polarity or you will destroy the radio. there is no protection against reverse polarity. Check the switch with the battery disconnected and using a multimeter set to read resistance or continuity.

Never heard of that :o What transmitter do you have then??

@@pilot140467 The transmitter is X9D, but I don't think that is relevant .This what I'm referring to from Git Hub.Users who compile their own MULTI-Module firmware can specify pre-set frequency fine tuning values in the firmware, so that they automatically apply to a given protocol. When configuring the firmware source, locate and edit this section in _Config.h: /*******************************/ /*** CC2500 FREQUENCY TUNING ***/ /*******************************/ //For optimal performance the CC2500 RF module used by the FrSkyD, FrSkyV, FrSkyX, SFHSS, CORONA and Hitec protocols needs to be tuned for each protocol. //Initial tuning should be done via the radio menu with a genuine FrSky/Futaba/CORONA/Hitec receiver. //Once a good tuning value is found it can be set here and will override the radio's 'option' setting for all existing and new models which use that protocol. //Valid range is -127 to +127 //Uncomment the lines below (remove the "//") and set an appropriate value (replace the "0") to enable. //#define FORCE_FRSKYD_TUNING 0 //#define FORCE_FRSKYV_TUNING 0 //#define FORCE_FRSKYX_TUNING 0 //#define FORCE_SFHSS_TUNING 0 //#define FORCE_CORONA_TUNING 0 //#define FORCE_HITEC_TUNING 0 //#define FORCE_HOTT_TUNING 0 If a fine tuning value is set in the firmware, the RF Freq. tuning value from the radio is ignored. Using the Module - Previous Channel Order Next - Using the Module Receiver Match Last updated 2 months ago WAS THIS PAGE HELPFUL? I thought this would be handy if using more than one transmitter, Do I have to create a config.h file as I'm unable to find it in the flashing firmware

@@alantoseland6629 As far as I know, and on the radios I use, 9xtreme and Ar9x boards for the 9x radio, both running ErskyTX as firmware, the calibration is stored on the model configuration itself, not in a config file somewhere.. Better you ask this question on the Multiprotocol module's thread at RC Groups.

@@pilot140467 ok thank you

Yes, it is possible, but you would have to built a voice module for it.

Are they newer parts to use for building the voice module ? like all in one or not..... Brett

@@kermets Please visit www.openrcforums.com and ask the same questions there. Here is not possible to give you the correct answers.. The voice module project page is on that forum..